Parts Needed To Install Tekonsha P3 Brake Controller # 90195 On A 1998 Ford F-150 With Factory 4-Way
Question:
I need someone to verify an install for me if they could. I have a 98 F150 XLT with a factory tow package and 4 pin plug. I need to set it up for a toy hauler, so here is what Ive picked out. 90195-3035P Brake Controller 118242 Adapter plug Kit PK12711U Bracket. Would be the proper set up? Does the 118242 come with the fuse/relay for the fuse block under the hood?
asked by: Jay
Expert Reply:
It sounds like you have done a good job in choosing the correct items for installing a brake controller on your 1998 Ford F-150 XLT with factory tow package. Everything you have chosen is the correct part for your application.
The Tekonsha P3 Brake Controller # 90195 and the Ford Adapter # 3035-P is a good choice for your vehicle. The P3 brake controller is a proportional brake controller which means it will only activate when you apply the brakes on the tow vehicle. It has a motion sensing device that will know how fast the tow vehicle is stopping and applies power to the trailer brakes, but it is only activated when the brake pedal is stepped on.
The # 3035-P Ford Wiring Adapter will plug into the back of your brake controller and the other end will plug into the factory brake controller port located under the dash.
The Tow Ready Wiring Harness # 118242 will install in-line with your factory wiring harness and allow you to keep your 4-way connector on the rear of your vehicle. It will include the relays and fuses that are needed to activate your towing system. This harness will plug into your factory connector that is located on the drivers side between the back tires and the end of the truck bed. I am sending a picture of where the factory connector is located on your vehicle.
The Pollak Mounting Bracket # PK12711U will work with the # 118242 wiring harness.
I am sending links to the instructions on the brake controller, Ford adapter, and the wiring harness. Also, I am sending a video link of all of the parts being installed on a 2001 Ford F-150.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- Pollak
more information >
Product Page this Question was Asked From
Ford Replacement OEM Tow Package Wiring Harness, 7-Way
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: gooseneck wiring
- Search Results: tekonsha 90195 p3 electronic brake control
- Search Results: tekonsha 90195 p3
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Shop: Brake Controller
- Video: Hayes Brake Controller HA81783-HBC Review
- Video: Hayes Brake Controller - Time Delayed Controller - HA81760 Review
- Q&A: Trailer Wiring For My 1999 Ford F-350 Super Duty With OEM Factory Tow Package And My 5th Wheel
- Shop: Bargman 5th Wheel/Gooseneck 90-Degree Wiring Harness - 7 Way RV - 7' Long
- Shop: 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long
- Shop: Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug
- Shop: Hayes Engage Trailer Brake Controller - 1 to 3 Axles - Time Delayed
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: brake controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer brake controller
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: etbc7
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Fifth Wheel Hitch
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: hitch