Compatibility of Access Tonneau on 2013 Nissan Frontier 5-Foot Bbed and Nissan Sliding Bed Extender

Question

Question:

2013 frontier 5 ft bed with extender, will the original roll up access with the adapter work with this truck

asked by: Terry D

0

Expert Reply:

Yes, the Access Original Soft Roll-Up Tonneau Cover # 834532006809 is a confirmed fit for your 2013 Nissan Frontier with 5-foot bed and Nissan sliding bed extender. You will need to use the adapter kit # 834532006946 on your pickup.

expert reply by: Adam R

0

Answer 1

In order for the bed extender and the tonneau to work together the bed extender will have to be adjusted 4 inches narrower. The adapter part #834532006946 allows it to be adjusted narrower and still install to the truck.

view full answer...

Answer 2

I spoke with my contact at Access and he informed me that the #A22030189 is not recommended for use with the utili-track trucks as due to its lower positioning. The cover will fit but it will eliminate the use of the track. The better option would be…

view full answer...

Answer 3

I checked with Kat's and the cartridge to use to install the heater part #KH11412 is on the driver side of the vehicle closest to the firewall.

view full answer...

Answer 4

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 5

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Compatibility of Access Tonneau on 2013 Nissan Frontier 5-Foot Bbed and Nissan Sliding Bed Extender

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching