Extended Length Weight Distribution Shank for Fastway e2 Weight Distribution System
Question:
All I can find so far is the Curt C17122 as an extended shank. I have the Fastway e2 6000lb trunnion and need the extended shank to fit my 2013 GMC Acadia. Will this shank fit, or do you sell a specific one for the E2 ? Thank you.
asked by: Alan H
Helpful Expert Reply:
The Curt Weight Distribution Shank, 14 Inches Long # C17122 will work well with your Fastway e2 Weight Distribution System # FA92-00-0600. This Curt weight distribution shank measures 14 inches from the center of the hitch pin hole to the center of the adjustment holes, and the shank is 18 inches long overall. The spacing of the adjustment holes on this shank is 1-1/4 inches center to center, which is the same as your existing Fastway weight distribution shank. I've attached a review video of the # C17122 weight distribution shank for you.
If you need an extended weight distribution shank that isn't quite as long as the # C17122, Curt also offers the Weight Distribution Shank, 10 Inches Long # 17120. This shank measures 10 inches from the center of the hitch pin hole to the center of the adjustment holes. The # 17120 will also fit well with your e2 system. I've attached a review video of this shank for you as well.
Products Referenced in This Question
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 7 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 10-1/4" Rise, 5-1/2" Drop - 1.2K TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Video: Review of CURT Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C87BR
- Q&A: Are Weight Distribution Head Assemblies and Shanks from Different Brands Interchangeable
- Q&A: Choosing the Correct Rise or Drop for Weight Distributing Shank
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Solution For Extending Weight Distribution Hitch On 2018 GMC Sierra 2500
- Search Results: weight distribution hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: Would Switching a Weight Distribution Shank to A longer One Change the Height of a WDS
- Search Results: hitch
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR