Choosing the Correct Rise or Drop for Weight Distributing Shank
Question:
I have a valley WD hitch. With my old truck the hitch was high causing the trailer not to be level. I need to the tongue but buying a new shank is confusing. Most shanks say x and Y rise. How do I know which shank to buy?
asked by: Joe P
Expert Reply:
Choosing a weight distributing shank is just like determining the needed rise or drop of a ball mount.
Determine the height of the top of your receiver, and the height of the trailer tongue when it is level. The difference between these measurements is the rise or drop needed. If the height of the trailer coupler is taller than the receiver height, you will use the rise measurement mentioned in the product description of the shank. If the receiver height is lower than the coupler height, use the drop measurement.
I have included a link to our FAQ page that shows how to choose the correct ballmount rise or drop, as well as a link to our selection of available weight distributing shanks.
Product Page this Question was Asked From
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Risk Racing Lock-N-Load Pro Strapless Dirt Bike Transport System - Trailers and Truck Beds - 315 lb
- Shop: Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Shop: Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW
- Q&A: Replacement Jack for Lippert Electric Tongue Jack LG-181794
- Search Results: drop down axle
- Search Results: drop down shank
- Search Results: weight distribution drop hitch
- Search Results: propane fittings
- Article: How to Measure for Trailer Hitch Drop
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 10-1/4" Rise, 5-1/2" Drop - 1.2K TW
- Q&A: General Height Rule for Setting up a Weight Distribution System
- Q&A: How Close Does Trailer Ball Height Need to be to the Height of the Trailer Coupler
- Q&A: How To Determine The Correct Rise/Drop For A Weight Distribution Shank For 2 Inch Hitch
- Q&A: Needing a Weight Distribution Hitch That Will Provide for a 3 Inches of More Drop
- Q&A: Availability of Longer Shank for Use with Fastway Weight Distribution System
- Shop: RV Camera
- Video: Curt Weight Distribution C17314 Review
- Shop: Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1
- Search Results: tongue weight scale
- Search Results: simple weigh
- Search Results: e~track
- Shop: Trailer Hitch
- Video: etrailer Landing Gear Set Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing