Wiring Diagram for Furrion Chill

Question

Question:

I bought 2 Furrion chill 15,000 to replace my old Dometic units. The existing thermostat goes to the front unit first then it is run to the Back unit and connected by a 4 wire phone cord. Also have one Furnace on this thermostat. I need wiring diagram for Furrion controllers and Furnace. Thanks

asked by: Tim

0

Expert Reply:

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, # FR86PR.

expert reply by: Michael R

0

550307_001
(click to enlarge)

550307_002
(click to enlarge)

Answer 1

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

view full answer...

Answer 2

I attached a picture I got from Furrion that shows a wiring diagram for the #FACC12SA-BL as well as an install video for you to check out.

view full answer...

Answer 3

Solera unfortunately only makes their arms compatible with a Dometic models and does not make their roller tube and springs compatible so you'd either have to reach out to Dometic for a replacement or completely replace your awning with one…

view full answer...

Answer 4

There is a diagram of the wiring for the Furrion #FR58PR in the instructions, but I've gone ahead and linked a photo of the wiring diagram as well as the instructions for this unit.

view full answer...

Answer 5

To replace the Dometic awning support arms on your RV we have the Solera kit part #LC434718 that you referenced which will work great. This comes with everything you'd need as well. We do not have just the Dometic part numbers you mentioned…

view full answer...

Answer 6

I was able to reach out to my contact at Lippert and they tell me that the Solera Rollbar Only for 18' Black Awning, Black Tube #LC260560405 is 208" long and 3-1/2" in diameter.

view full answer...

Answer 7

Lippert's roller tubes are not a universal fit so they have not been confirmed to fit on a Dometic awning. I recommend upgrading to a Lippert awning like the Solera Smart Arm 12V Power RV Awning - 18' Wide - Programmable - White…

view full answer...

Answer 8

I do have a solution, but we do not offer a left arm for your Dometic awning. What we do have is the Solera Classic Universal Awning Support Arms #LC434720 for 81" - 96" arms, or #LC434718 for 68" - 81" arms. These…

view full answer...

Answer 9

Looking at the bottom foot of the Solera Classic Universal Awning Support Arms item #LC434718, I can say the mounting pattern is different but the latch looks identical. You may not even have to remove the bottom foot. I am not sure I have ever…

view full answer...

Answer 10

The 15,000 Btu Furrion Chill HE AC like the part #FR23PV does indeed have a start capacitor. In regard to the starting power needed, I reached out to Furrion, who told me the 15,000 Btu Chill AC's require 30 amps and 2,500 starting watts. So…

view full answer...

Answer 11

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are…

view full answer...

Answer 12

I spoke with Furrion and they stated that the newer thermostats would be compatible with older model systems and that once you swap over to the new thermostat the system should automatically swap over to the thermostat temperature probe without you…

view full answer...

Wiring Diagram for Furrion Chill

Product Page this Question was Asked From

Continue Researching