Would Pollak 7/4-Pole Trailer Connector HM40975-11933 Connect To Mopar Harness on 2015 Wrangler

Question

Question:

I have an OEMinch Mopar 7 Pin harness installed on my JK Unlimited Rubicon P/N - 82210214AB i would like to purchase your Code: HM40975-11933 does that connect directly to my harness? or do i need an adapter?

asked by: Ron

0

Expert Reply:

Yes, the square connector of the part # HM40975-11933 would attach directly to the square connector of the OEM Mopar wiring harness you have installed on your 2015 Jeep Wrangler Unlimited.

expert reply by: Jameson C

0

Answer 1

For your 2014 Jeep Wrangler Unlimited with factory tow package, I recommend the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter #HM40975-11933. This kit gives you the wiring adapter you were asking…

view full answer...

Answer 2

For your 2009 Jeep Wrangler Unlimited with a factory 4-way trailer wiring harness the Pollak 7-Way and 4-Way part #HM40975-11933 that you referenced would be exactly what you'd need. This will replace the 4-way you have now and give you a 4-way…

view full answer...

Answer 3

There are a few different trailer wiring harness options for a 2015 Jeep Wrangler Unlimited. The Hopkins Endurance Quick-Install 7-Way Trailer Connector part #HM42190 is only for models with the factory tow package. If you don't have the factory…

view full answer...

Answer 4

I do have a way for you to haul skis, snowboards, and/or fishing rods on your Rhino-Rack Pioneer Platform Rack but the Rhino-Rack Ski and Snowboard Carrier part #RR576 will not work. The Rhino-Rack Ski and Snowboard Carrier is only designed to fit…

view full answer...

Answer 5

So your Thule Hullavator carriers 897XT weigh right at 20 lbs per carrier. So you'd have 40 lbs of carrier and 120 lbs of kayaks. That would mean you'd have 5 lbs of capacity to spare and would be technically safe. Since Thule now uses a…

view full answer...

Answer 6

From my understanding you should just need the M6 x 30 Socket Head Cap Screw #TH919063054, the M6 Washer #951061254, and the Square Nut #853-7557 for installing the older Hullavator into the T-Slot of a crossbar system. This stuff should have come…

view full answer...

Answer 7

No type of adapter will be necessary to use the Thule Hullavator #TH898 with WingBar Load Bars, as they will fit into the channels of those bars. For your 2011 Audi Q5 you can install the Thule WingBar Crossbars #TH711220 (Black) or #TH711200…

view full answer...

Answer 8

Yes, there are certain Rhino-Rack Pioneer Platform Racks that can be mounted to Thule Square Crossbars but they must be the Universal; part #RR42115BF for 58" long x 47" wide or part #RR42114BF for 48" long x 38" wide.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...