Can Stock Trailer with Vacuum Over Hydraulic Brakes be Converted to Electric Over Hydraulic

Question

Question:

I am wanting to convert a tandem axle 20,000 gvw trailer from a non working vacuum over hydraulic braking system to electric over hydraulic system. What would I need to do this and is it something I can do myself or does it have to be professionally installed? This is a 1989 Wilson PSGN-728 livestock trailer 35foot gooseneck trailer

asked by: Derek B

0

Expert Reply:

You can convert your trailer with vacuum over hydraulic brakes to electric over hydraulic brakes. Since you already have hydraulic brakes that would mean you have the correct assemblies and lines ran already. It would be just a matter of removing you old actuator and installing a new one.

Our favorite actuator is the HydraStar actuators. They are the most reliable and best performing. If you have disc brakes you would want the part # HBA16 or if you had drum brakes part # HBA-10.

If you have basic tools and mechanical skills this would be a very easy install.

You will need a compatible brake controller like our very popular P2 part # 90885.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 4

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Can Stock Trailer with Vacuum Over Hydraulic Brakes be Converted to Electric Over Hydraulic

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching