Class V 2-Inch Hitch Fits for 2003 GMC Sierra 3500 4x4 Dually

Question

Question:

does this fit 2003 gmc 3500 4x4 dually

asked by: JR

0

Expert Reply:

B&W 2-inch Class V hitch # BWHDRH25182 is a fit for Chevrolet and GMC 2500 Series pickups, but for your 3500 Series we offer a 2-inch Class V B&W hitch # BWHDRH25187 that fits trucks with a 10-inch step bumper, and also hitch # BWHDRH25189 that fits trucks with a standard factory bumper.

All class V hitches for your truck are shown on the linked page.

expert reply by: Adam R

0

Answer 1

The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W #BWHDRH25187 which has a 6-1/2 inch drop. The…

view full answer...

Answer 2

The B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25187 is what I recommend for your 2006 Chevrolet Silverado 3500. The B&W Heavy-Duty Trailer Hitch Receiver is a direct bolt-on fit with no drilling required so it will be an excellent…

view full answer...

Answer 3

The B and W Hitch part #BWHDRH25187 does fit your 2003 GMC Sierra 2500HD and will give you the additional drop you are wanting since it is normally used on trucks with drop bumpers.

view full answer...

Answer 4

Not confusing at all. I took a look online and the 2001 Silverado 2500HD has a 12,000 lbs bumper pull towing capacity and a 15,200 lbs 5th wheel towing capacity. It's just two different capabilities of the truck. The extra weight of a 5th wheel…

view full answer...

Answer 5

The B&W trailer hitch #BWHDRH25182 does not come with the mounting bracket for a 7-Way trailer connector. A couple of cool 7-Way brackets that I like are the Curt Easy Mount #C58000 and the Draw-Tite box, #18159. Either one will work with the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

For your 2024 Toyota RAV4, the best trailer hitch receiver that will fit is the following: - etrailer Trailer Hitch Receiver #e23ZR The #e23ZR is the best because it has completely concealed crosstube so only the receiver is showing, allowing your…

view full answer...

Answer 12

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Class V 2-Inch Hitch Fits for 2003 GMC Sierra 3500 4x4 Dually

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching