Is Lube Plate for Pro Series Fifth Wheel Hitch Available

Question

Question:

I have a pro series slider hitch that has the removable hitch plate. can you buy just the top part of this hitch.

asked by: Mitch L

0

Expert Reply:

I believe you are referring to a lube plate. For a lube plate you would want the part # RP83002 which is 10 inches in diameter.

expert reply by: Jameson C

0

Answer 1

The correct lube plate for a B&W Companion 5th Wheel Hitch is the Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 which is 10" diameter x 0.192" thick.

view full answer...

Answer 2

The size of the king pin on the trailer's pin box is an industry standard. Therefore, the B&W Companion 5th Wheel Trailer Hitch part #BWRVK3400-5W will work with your trailer unless you have a Sidewinder/Revolution pin box. In order…

view full answer...

Answer 3

The standard king pin dimension for a semi-trailer is 2 inches diameter, where the fifth-wheel jaw wraps around the king pin. I went out to the etrailer.com semi-trailer on our lot, see link, and produced a short video showing both of the king pins…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 8

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 9

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

view full answer...

Answer 12

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Is Lube Plate for Pro Series Fifth Wheel Hitch Available

Product Page this Question was Asked From

Continue Researching