Recommended Hitch for 2000 Honda Accord 2 Door

Question

Question:

Hi im looking to install curt hitch on my honda accord 2000 2 door, will it fit ? thank you

asked by: Mike

0

Expert Reply:

The Curt Class I Receiver Hitch, part # C11290 is a fit for your 2000 Accord. If you were planning on using the hitch for an attachment point for a bike rack, keep in mind that the reinforcement strap part # 18050 must be used or else the manufacturer warranty will be void.

expert reply by: Mike L

0

Answer 1

I managed to locate an online copy of the 2000 Accord Owners manual. On page 186, Honda states that the maximum towing capacity of the vehicle is 1,000 lbs and that the maximum tongue weight load (downward force applied to hitch) should be no more…

view full answer...

Answer 2

The best option that I can offer that is also compatible with the Class I trailer hitch on your 2016 Honda Accord is the Brophy adapter #HT5R. It will provide an additional 5 inches of rise. It fits the 1-1/4 hitch you have but the upper receiver is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Recommended Hitch for 2000 Honda Accord 2 Door

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching