Truck Cap/Camper Shell Ladder Rack Recommendation for a 2008 Toyota Tacoma

Question

Question:

do you have a ladder rack that will fit on the cap on the back of my 2008 Tacoma ?

asked by: Hal W

0

Expert Reply:

For your 2008 Toyota Tacoma with a cap or camper shell installed the TracRac Ladder Rack part # TH29200XT has been confirmed as a fit and would work well.

I attached an install video that shows the rack being installed on a similar vehicle for you to check out as well.

expert reply by: Jameson C

0

Answer 1

You will be fine and do not have to worry! The 200lb weight capacity of your roof rack is simply the dynamic capacity, meaning the maximum weight that can be on the roof when the vehicle is in motion and going over bumps in the road etc. Since you…

view full answer...

Answer 2

The 220 lb weight capacity of the Rhino-Rack Roof Rack System #Y01-130B that you referenced is a dynamic weight capacity. This means it's the weight it can carry when on the road. Static would be capacity standing still which Rhino Rack does…

view full answer...

Answer 3

The Rhino-Rack Sunseeker awning, part #RR32133, does require crossbars or the Rhino-Rack Pioneer platform, all of which are linked, to mount on your roof. It does install into the channel on a crossbars that have one, which many do, but not directly…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Truck Cap/Camper Shell Ladder Rack Recommendation for a 2008 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching