Is HydraStar Electric Over Hydraulic Compatible Integrated Brake Controller of 2015 Chevy Silverado

Question

Question:

When I go to purchase the Hydrastar Marine Grade Electric Over Hydraulic Actuator - 1,200 psi what are the accessory items I will also need as I already have the controller in my truck. Also is this product compatible with 2015 Chevrolet Silvarado 4X4

asked by: Ron B

0

Expert Reply:

Your 2015 Chevy Silverado integrated brake controller would work fine with this actuator # HS381-8066 as in 2015 Chevy started installing brake controllers in their trucks that are compatible with electric over hydraulic actuators.

Without knowing how your trailer is setup already it's hard to say exactly what you would need, but if you check out the help article I attached you will see a guide that will walk you through the whole process of adding EOH brakes to a trailer.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Answer 4

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...