Tonneau Cover Fit for 2012 Dodge Ram 1500 w/ 6 Foot Bed, RamBox and Cargo Management Rails

Question

Question:

Does this cover work with factory cargo management system rails? And if so is there any additional parts needed?

asked by: Jason

0

Expert Reply:

The Truxedo Lo Pro QT Tonneau cover you mentioned, part # TX547901 is indeed compatible with the 2012 Dodge Ram 6 foot bed with RamBox and the cargo rails. No other parts are needed for installation. I've confirmed the fit with my Truxedo representative.

expert reply by: Mike L

0

Answer 1

The BAKFlip MX4 Hard Tonneau Cover #BAK48203RB for your 2020 Ram 2500 with the 6-1/2' bed will have 4 sections. The image from BAKFlip is a generic picture that is on a Silverado. Both the customer image that you found as well as our…

view full answer...

Answer 2

Yes, the TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl - Matte Black Item #TX1447901 is specifically designed to fit the 2019 Ram 2500 6-1/2ft bed with the ram box.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...