2016 Hyundai Tucson Thule Roof Rack Recommendation

Question

Question:

Hi. most of your older articles about tucson 2016 reference KIt4029 same as 2013-2016 santa fe for the Thule racks. however the more recent ones reference KIT4062. Same thing with the thule website previously suggesting 4029 and now 4062. Would those be almost identical and interchangeable? And to an extent, would any 2013-2016 Santa fe crossbar kit work with the 2016+ tucson?

asked by: David

0

Expert Reply:

The correct components you need to complete a Thule Aeroblade Edge Roof Rack are part # TH7602-TH7602 for the crossbars and feet along with the discontinued fit kit 4062.

If your 2016-2018 Tucson has flush mounted rails, you can use the WingBar crossbars # TH711420, feet # TH710601, and fit kit # TH186013.

For your 2013-2016 Santa Fe, the rack you will want consists of the same WingBar # TH711420, Evo feet # TH710501, and Fit kit # TH145059. This crossbars don't end at the feet, so this is more of a traditional roof rack but it is excellent quality and still has a nice look.

expert reply by: Jameson C

0

Answer 1

The 53" Thule WingBar Evo Crossbars, Black #TH711420 and Silver #TH711400, have channels on the bottom which measure 9-3/4" on either side. This means that the space between the channels is 33-1/2". As long as you…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 10

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 11

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is the…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

2016 Hyundai Tucson Thule Roof Rack Recommendation

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching