Recommended Trailer Hitch And Trailer Wiring For 2007 Honda Accord Coupe
Question:
I am wanting to put a hitch on my car, I am trying to figure out how to ensure I dont overload the tongue weight capacity of my car. 2007 Honda Accord Coupe pulling a 310lb, 3 rail motorcycle trailer loaded with 3 motorcycles weighing under 400lbs each. I am under the 2000lb weight limit if I load all 3 should only need 2 loaded. How do I get/figure out tongue weight. Before purchasing I want to make sure I do not damage my vehicle.
asked by: Guy J
Expert Reply:
I did some research on your 2007 Accord Coupe and according to the owner's manual, you are limited to a 1,000-lb towing weight capacity. That is the combined weight of the trailer and any cargo loaded on the trailer. This information is on page 213 of the owner's manual. It also stated that the maximum tongue weight is 100-lbs. I am afraid carrying 2 motorcycles that weigh 400-lbs on a trailer that weighs 310-lbs would exceed the towing capacity of your Accord.
If you find you can eliminate some of the total weight the trailer hitch I recommend is the Draw-Tite, part # 24787. This is a Class l hitch and it has a 1-1/4 inch receiver opening.
You will also need a ball mount and hitch ball for towing. The ball mount I recommend is the Sportframe Drawbar, part # 3592. This ball mount has a 2-1/8 inch rise or 2-3/4 inch drop.
For a 1-7/8 inch diameter hitch ball I recommend part # 19256 and for a 2 inch hitch ball I recommend part # 19258.
The hitch pin and clip I recommend is part # PC2. For a locking hitch pin that helps deter theft I recommend part # e98879.
If you need a trailer wiring harness for your Accord I recommend part # C59236. This simply plugs into the vehicle wiring located behind the tail lights, and no cutting or splicing of the vehicle wiring is required.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: Trailer Wiring Harness Installation - 2006 Honda Accord
- Video: Trailer Hitch Installation- 2004 Honda Accord
- Shop: Trailer Wiring
- Q&A: 2007 Honda Accord V6 Sedan Towing Capacity and Hitch Recommendation
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Shop: 2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Search Results: hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: wiring harness
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Roof Rack
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: trailer hitch wiring
- Article: How to Measure for Trailer Hitch Drop
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Crosstrek
- Article: My Trailer Hitch Doesn't Fit