Trailer Tongue Jack with 10 Inch Retracted Height Needed for a Lawn Vacuum Trailer
Question:
I have a vacuum trailer that attaches to my lawn tractor. Im looking at this trailer jack to support the trailer and ease hookup. The trailer needs to be at about 10 from the ground to the top of the mounting bracket for this to be low enough to connect to the lawn tractor. Is this hitch capable of that?
asked by: Steve P
Expert Reply:
The bottom of the swivel mount will be 11-1/2 inches from the bottom of the wheel when the bracket is adjusted to its lowest height. Depending on the size and design of your Vacuum trailer frame this jack may work for you.
Another jack that may work for you is the Bolt-On, Drop Leg Trailer Jack - Sidewind - 2,500 lbs. by Dutton-Lainson, item # DL22320. When in its lowest position the bottom of the foot to the mounting plate is about 3 inches and the holes in the bracket extend up from 3-1/2 inches to 10 inches. There is not a wheel available for this jack at this time.
Products Referenced in This Question
Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 28-1/2" Lift - Zinc - 2.5K
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 2001 - 3000 lbs
- Sidewind Jack
- 28 Inch Lift
- Weld-On
- With Rectangle Foot
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel, Sidewind, Bolt-On - 1,600 lbs
- Trailer Jack
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Alloy Aluminum
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs
- Shop: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. by Dutton-Lainson
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K
- Shop: Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheels - Sidewind - 12" Lift - Zinc - 770 lbs
- Video: Ark Sidewind Extreme Off-Road Swing-Up Trailer Jack Review
- Search Results: tongue jacks
- Search Results: tongue jack
- Q&A: What is the Bracket Height on the DL22800 When Fully Retracted
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer jack
- Search Results: 25580
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: fender
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Q&A: Replacement Hub/Drum for Lippert 8k Hub 2420801
- Search Results: equalizer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation