Replacement Dexter Hubs For A Dexter K08-219-9B Axle Hub
Question:
I need to replace a Dexter K08-219-9B Axle Hub 7,000#, EZ Lube, 1/2 Studs, 2.25 Seal. What part do you recommend? Thx.
asked by: Jack M
Expert Reply:
The Dexter Trailer Hub and Drum Assembly for 5,200 pound to 7,000 pound Axles # 8-219-9UC3 is the correct hub you will need.
The hub has a 8 on 6-1/2 bolt pattern. This hub works with 12 inch brake assemblies, and works with wheels from 16 inches to 17-1/2 inches. It has a wheel bolt diameter of a 1/2 inch. You would have to purchase the correct seal # GS-2250DL because the seal in the kit is 2.125 inches.
The hub has an inner bearing # 25580 (1.75 inch inner diameter) and an outer bearing # 14125A (1.25 inch inner diameter). The hub has a sturdy iron construction.
Bearings, races, seal, oil cap, wheel bolts, and lug nuts are included.
I attached a review video link below.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 8 lug hub
- Q&A: Replacement Hub and Brake Assemblies for Dexter 8-219 Wheel Hubs
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-219-9UC3 Review
- Search Results: 8~219~9uc3
- Search Results: dexter 8~219
- Search Results: 42866uc3~ez
- Shop: Replacement 12 mm x 1-1/2" Hub Wheel Stud for Demco Kar Kaddy SS Tow Dolly - Qty 1
- Q&A: How to Choose a Replacement Dexter Hub/Drum Assembly
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Search Results: dexter 010 010 00
- Search Results: dexter 8 219
- Search Results: dexter 010 036 00
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle