Distance from Hitch Ball to Chain Hanger Bracket When Installing Curt Weight Distribution
Question:
Hello, I have a home made trailer, I am concerned about the length from the ball to where the brackets fit over the trailers frame for the lift chains? Also for the brackets that fit over the frame how wide can the frame be? What 2inch ball would go with this weight distribution hitch?
asked by: Roger
Expert Reply:
The inside width of the frame channels of the Curt Hangers part # C17057 that you referenced are 3-3/16 inches.
The distance from the center of the hitch ball to the center of the frame hanger will be 31 inches.
If either of the two dimensions I listed would pose a problem for installing the # C17057 on your trailer you have the option of using the bolt on brackets part # C17005 which will bolt to the side of the trailer frame. This will get around the problem of a trailer frame being too wide or if there is interference above the trailer's frame 31 inches back from the hitch ball.
For a 2 inch hitch ball you would want the part # 40038.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- CURT
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW
- Q&A: Tongue Weight Capacity of Curt # C17057 Round Bar Weight Distribution System
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank - 10K GTW, 1K TW
- Q&A: Availability Of Trailer Tongue Weight Scale
- Q&A: Does the Plug on the etrailer Tongue Weight Scale Need to be Perforated
- Q&A: Is Welding Required for Installation of Reese Friction Sway Control Kit
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Distance Between the Trailer Ball and the Sway Control Ball on the Trailer
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems - Clamp On or Bolt On
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Video: Reese Sway-Control Bracket Review
- Video: Reese Friction Sway Control Kit Review
- Search Results: curt weight distribution hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: 44649
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: dust cap
- Video: B&W Continuum Weight Distribution System Review
- Video: etrailer Campers and Utility Trailers Tongue Weight Scale Review