Roadmaster InvisiBrake Breakaway Pin Replacement Recommendation

Question

Question:

I see Roadmaster and part 200200-20, but no mention of InvisiBrake. This would be the proper replacement part for the InvisiBrake made by Roadmaster, yes? Im told if that pin gets removed, that the car wont run, so Im looking for a spare pin as backup.

asked by: Karen

0

Expert Reply:

The replacement breakaway pin for the InvisBrake # RM-8700 is the # RM-200200-20 that you referenced. It is the correct replacement switch key for the Roadamster Even Brake and Brake Pro Breakaway systems, and it will also fit your InvisiBrake system.

expert reply by: Jameson C

0

Answer 1

The replacement breakaway pin for the invisBrake #RM-8700 is actually #RM-200200-20, so this is the one you need. I do not recommend using a different pin, like #3802350 (replacement cable and pin for Bright Way #3802308 Breakaway Switch) because…

view full answer...

Answer 2

The switch can be somewhat difficult to fully seat in the housing but basically you just have to make sure the switch #RM-200200-20 is lined up properly and then apply firm pressure to get it to go all the way in.

view full answer...

Answer 3

We do have the replacement pull pin (key) for Roadmaster BreakAway systems. You will need part #RM-200200-20. It's also worth mentioning, we do have a complete replacement break away switch for Roadmaster break away systems, part #RM-650898.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Roadmaster InvisiBrake Breakaway Pin Replacement Recommendation

Product Page this Question was Asked From

Continue Researching