2002 Winnebago Sightseer P32 Sway Bar Recommendation

Question

Question:

Does the 1109-200 fit this motorhome? I know the spreader bar does not fit, and the sway bar 1109-116 does not fit.

asked by: James O

0

Expert Reply:

Yes, the Roadmaster Sway Bar kit part # RM-1109-200 would fit your 2002 Winnebago Sightseer P32. Since the # RM-1109-116 does not fit that would indicate that you have the widetrack body which is what the # RM-1109-200 is designed to fit.

expert reply by: Jameson C

0

Answer 1

The diameter for the Roadmaster Sway Bar part #RM-1109-116 is 1-5/8 inches like the instructions list.

view full answer...

Answer 2

In order to add an anti-sway bar to the front of your 1995 Chevrolet P30 chassis, you will want to use the Roadmaster Anti-Sway Bar and Bushing Kit for Motor Homes part #RM-1109-116. The anti-sway bar will help with side to side movement, driver…

view full answer...

Answer 3

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a…

view full answer...

Answer 4

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just…

view full answer...

Answer 5

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…

view full answer...

Answer 6

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 7

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…

view full answer...

Answer 8

To flat tow your 2021 Jeep Wrangler Unlimited 4Xe Rubicon Hybrid you will need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below: Tow Bar: Roadmaster Nighthawk All…

view full answer...

Answer 9

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 10

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...

Answer 11

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 12

In regards to steering and keeping the wheel centered, the Roadmaster Exact Center Steering Stabilizer part #RM47MR will work great for this on a 2022 Ford E-450 Chassis. The stabilizer is basically a spring that returns the wheel to center when not…

view full answer...