Is it OK to Mix Different Brands of Weight Distribution Head & Shank Components
Question:
Does the weight distribution hitch and shank have to be from the same manufacturer? I need a minimum of a 10inch rise and am having getting the two from the same dealer
asked by: Robert
Expert Reply:
All other things being equal, yes, it is better to use a weight distribution head assembly and shank from the same manufacturer. This allows you to know with certainty what the weight capacity of such a set-up actually is. If parts from different manufacturers are mixed there could potentially be fit issues due to things like different machining tolerances or to the thickness of a powder-coat finish. Staying with the same maker tends to avoid any such concerns.
That said, if the head and shank parts fit together properly and if they all share the required weight capacity for your set-up then you certainly will be fine using different brands together. Most shanks have 3/4-inch holes for the head unit and these are spaced at 1-1/4-inches on center. Spring bars and hangers should never be interchanged.
Curt shank # C17123 has the necessary rise - up to 11-1/2-inches with trunnion bars and 12-3/4-inches with round bars. This shank fits 2-inch hitches.
Products Referenced in This Question
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Pro Series Weight Distribution Shank - 12" - 12,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Pro Series
more information >
Continue Researching
- Q&A: Cargo Carrier Recommendation For A Keystone Outback With A Recessed Bumper
- Q&A: Switching From 12 Volt Batteries To 6 Volt Batteries Blowing Fuses On Camper Trailer
- Shop: 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Shop: 24x40 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Search Results: 2 1 2 weight distribution shank
- Search Results: cargo rack
- Search Results: blue ox shank
- Search Results: battery cable
- Search Results: weight distribution shank
- Search Results: shank
- Search Results: blue ox sway pro
- Video: Review of Blue Ox Weight Distribution - BXW4028
- Shop: Reese Titan Reducer Sleeve 2-1/2" to 2"
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch - 9" Long - 9 Hole Adjustment
- Video: Review of Equal-i-zer Replacement Head For Equal-i-zer Weight Distribution Systems - EQ90-02-1200
- Video: Equal-i-zer Weight Distribution EQ90-01-1299 Review
- Video: Review of CURT Weight Distribution Hitch - Weight Distribution Shank - C17132
- Q&A: Best Weight Distribution Shank for a 2018 Ram 2500
- Shop: Replacement Head for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW
- Shop: Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Shop: Replacement Head for Equal-i-zer Weight Distribution Systems - 1,200 lbs TW
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Video: Choosing the Right Brake Controller
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
