Can I use Class II Draw-Tite Trailer Hitch on a 2003 Subaru Forester to Carry a Bike Rack

Question

Question:

I only want to use this hitch to hold a bike rack...will this work? thank you

asked by: Michael S

0

Expert Reply:

Yes, the Draw-Tite hitch 36311 will fit your 2003 Subaru Forester and can carry a bike rack. This hitch is a Class II 1-1/4 inch hitch, so make sure the carrier you want to use is built for a 1-1/4 inch hitch.

I have added a link below to a page that has all the bike racks we carry that will fit a Class II 1-1/4 hitch.

expert reply by: Patrick B

0

Answer 1

The question is not moronic, it actually comes up frequently, so no worries! There are adapters that allow you to use 2 inch accessories in a 1-1/4 inch hitch such as #HTAD. However, the use of an adapter will reduce the tongue weight capacity of the…

view full answer...

Answer 2

I may have a solution for you to have a 2 inch hitch receiver opening on your 2004 Subaru Forester. The only hitch available for your Forester is a Class II, 1-1/4 inch receiver hitch like the Draw-Tite Trailer Hitch, #36311. I have attached an…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Can I use Class II Draw-Tite Trailer Hitch on a 2003 Subaru Forester to Carry a Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching