Recommended Cargo Carrier with Ramp That Has 4 Inch Shank Rise

Question

Question:

Do you sell a wheel chair carrier with a Shank rise: 4inch and 500 lb capacity?

asked by: Ted

0

Expert Reply:

For a cargo carrier with a ramp that has a shank rise of 4 inches, I recommend the Pro Series Steel Solo Cargo Carrier and Folding Ramp # PS10401-10402. However, this ramp has a weight capacity of 400 pounds.

This carrier is designed to fit in 2 inch trailer hitch receivers. The carrier alone weights 105 pounds. I have attached a review video of this carrier for you.

expert reply by: Victoria B

0

Answer 1

For a folding scooter carrier that comes with a ramp you would want the Flint Hill Goods 30" x 50" Carrier w/ 48" Ramp 500-lb-Capacity #FHG77ZR. This would work well for you as long you have a 2-inch hitch installed on your vehicle. I…

view full answer...

Answer 2

I went out to the warehouse and pulled Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches #BWGNXA4085 to measure it. The ball itself is about 5 inches tall from the top of the platform. The platform is 3/4 inches thick. The overall height…

view full answer...

Answer 3

The ball extension part #BWGNXA4085 actually gives more clearance than a gooseneck coupler extension. Reason being that with the ball extension you move the pivot point back but with the coupler extension the offset's additional clearance…

view full answer...

Answer 4

The tongue of the trailer needs to be above the bed rails so that the trailer can turn correctly when making turns and going over bumps to clear the truck. I will attach a photo to help explain the clearances needed for your trailer.

view full answer...

Answer 5

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Cargo Carrier with Ramp That Has 4 Inch Shank Rise

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching