Review of CURT Fifth Wheel Hitch - CrossWing Lightweight 5th Wheel Hitch - C92DR Video

The Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #C32DR and part #C92DR are the exact same. This hitch is designed to attach to a gooseneck hitch and provide a connection for a fifth wheel hitch. Therefore, if you have…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

I checked with Curt and the footprint dimensions of the base of the Curt CrossWing Lightweight 5th Wheel Hitch part #C92DR are 25.8 inches front to back and then 42 inches from left to right.

Safety chains are not required to be used with the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter item #C32DR. The chain connectors will not be in the way the bed protector supports will mount over the sockets.

Jameson's wording could've been better but what he meant was that there isn't any way to adjust the connection point of the Curt CrossWing Lightweight #C92DR since it only allows for you to raise of lower the hitch head. In the question…

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 that you referenced has an offset of 3 inches which would give you 3 more inches of turning clearance than what you have now.

You are looking for the Curt Crosswing part #C92DR. This is the version of the hitch that attaches to a gooseneck ball like your OEM ball in your truck.

An E1 error code on your Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR means that it tried to ignite twice but didn't have the correct amount of gas pressure. First check to make sure your gas valves are fully…

The Curt CrossWing item #C32DR has a 5" offset from the center of the gooseneck ball to the center of the kingpin. The base of the Crosswing is 23-1/4" x 24-1/4". The Curt CrossWing item #C32DR is compatible with a standard height…

Yes, you can use the Curt Rota-Flex 5th Wheel Pin Box item #LC328329 with the Sliding B&W Companion 5th Wheel Trailer Hitch #BWRVK3400 or the Fixed item #BWRVK3500. Both of these hitches will work with your F-250's Turnover ball system. Since…

To be able to use the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR with your 2019 Ram 2500 with OEM pucks, you're just going to need the: -Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package #DM6099. This rail…

The head of the Demco Recon 5th Wheel Trailer Hitch #DM8550043, which can be found as part #DM6169, weighs about 47 lbs. The base, which is part #DM6180, also weighs in at about 47 lbs. This puts the total weight of the Recon just under 100 lbs.