Parts Needed to Add 7-Way Trailer Wiring to 2002 Dodge Ram 1500 with No Factory Trailer Connector

Question

Question:

I would like to add a 7 pin connector to my Dodge Ram 1500 that did not come with the factory trailer wiring. What all would I need to complete this? Thanks

asked by: Bob

0

Expert Reply:

Since your 2002 Dodge Ram 1500 did not come with a factory trailer connector, you will want to install a universal wiring harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236. This wiring harness will splice into your vehicle's wiring. I have attached installation instructions as well as a review video for you.

To add a 7-way blade-style connector, you will want to use the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7. This kit includes a trailer connector for 7-way and 4-way connectors, as well as all of the hardware and wiring needed to install a brake controller and have a functioning 7-way connector. I have attached an installation video of the #ETBC7 kit on a 2001 Dodge Ram for you to have an idea of the installation process. I have also attached a help article on installing the kit.

If you need a brake controller, I recommend the Tekonsha Prodigy P2 # 90885. This proportional brake controller features 3 boost settings and has an easy-to-read LED display. The controller performs continuous diagnostic checks to alert you to any possible problems. You can see how the Prodigy P2 # 90885 is installed in the installation video that also features the # ETBC7 kit. I have also linked a help article on installing a brake controller from scratch.

expert reply by: Victoria B

0

Answer 1

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Parts Needed to Add 7-Way Trailer Wiring to 2002 Dodge Ram 1500 with No Factory Trailer Connector

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching