Brake Controller Wiring Diagram for 1999 Dodge Dakota Without Factory Tow Package

Question

Question:

send wiring diagram.

asked by: Ken H

0

Expert Reply:

We can help you with wiring instructions for a trailer brake controller in your 1999 Dodge Dakota that does not have the factory 7-way trailer connector at the rear bumper. I have linked both a general wiring schematic and a helpful detailed article concerning brake controller installations.

Any controller you choose will install using our installation kit # ETBC7. This includes the 7-way socket, wiring, connectors and circuit breakers. For reference I linked a video showing the kit installed in a 2009 Dakota.

If your truck does not already have a working 4-pole flat trailer connector you will need to install one of these as well. I recommend Tow Ready # 118329 which you can see installed in a 1999 Dakota by clicking on the linked video. The is a simple plug-n-play item that requires no cutting or splicing of wires.

Once your 4-pole harness and ETBC7 are installed you can wire in any controller of your choosing. Among the most reliable and highly-rated units we offer is the Tekonsha Prodigy P3 # 90195. This advanced proportional controller works with both electric and electric-over-hydraulic brakes, includes built-in diagnostics for troubleshooting and has a customizable display that is easy to read. It will slow your trailer in direct proportion to the braking action it detects in the Dakota, which delivers smoother handling overall. The P2 # 90885 delivers the same proven performance, without some of the convenience features included in the P3, at a lower price.

expert reply by: Adam R

0

click to enlarge

Answer 1

Your 2002 Dakota can be flat-towed. I did some research and found the recreational towing instructions on page 202 of the owner's manual. There are restrictions and instructions you will need to follow in order to tow your truck. You will need…

view full answer...

Answer 2

The 2011 Dodge Dakota came with a factory 7 way, so it's possible that you potentially had the 4 way installed aftermarket- but I have a way you can check. If your 4 way is plugged into a square plug similar to the one shown in the attached…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...

Brake Controller Wiring Diagram for 1999 Dodge Dakota Without Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching