Availability of RV Dehumidifier for R-Pod Trailer

Question

Question:

do you stock a small dehumidifier for a RV R Pod

asked by: Marshall

0

Expert Reply:

We do not offer actual electrically-operated dehumidifier devices but we do offer the Camco Mini Dehumidifier # CAM44195. This compact unit measures 6 x 3-1/4 x 4-1/2 and has a usable lifespan of 3 to 6 weeks in most applications. Please refer to the linked video for more on this item.

expert reply by: Adam R

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The Stromberg Carlson Electric Trailer Jack #JET-5000 has a ground connection to the trailer frame through the mounting flange. The ground connection needs to be solid, so often a star washer is used to ensure a connection or the bottom of the flange…

view full answer...

Answer 8

It is likely that the interior gears have stripped when the jack over-extended. If you have the manual crank that should have came with the jack, use it by removing the rubber plug at the top of the jack, insert the crank and fit it to the override…

view full answer...

Answer 9

If all of your wiring looks good and you have solid connections then the problem is most likely your ground. You will want to make sure that the ground on your Stromberg Carlson #JET-5000 has a solid, metal-to-metal, connection to your trailer frame.…

view full answer...

Answer 10

The first thing I recommend is checking the ground connection as this jack is grounded through the mounting plate. Sometimes removing some paint and/or using a star washer is a good option to make sure there is metal to metal contact for proper…

view full answer...

Answer 11

You are going to have to remove your current A-frame jack and replace it with one that does have a motor as there isn't a way to add motors to jacks that don't currently have them. I think the best value for an A-frame tongue jack is the…

view full answer...

Answer 12

I would be happy to help you. Based on the information you have given me I am going to give you the height of the Stromberg Carlson Electric Trailer Jack Item #SC63VR you referenced. This jack sits 21 1/4" above your trailer's frame. You…

view full answer...

Availability of RV Dehumidifier for R-Pod Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching