How to Pick Out Replacement Hubs for a Trailer
Question:
I am trying to replace the wheel bearing assembly on a 1995 Coleman Fleetwood Stoney Creek pop up camper and it being 20 years old and to my knowledge it has never been repacked with grease. I feel it is best to just replace the assembly all together. I have searched the web for part numbers and have zero luck so Im hoping yall can steer me in the right direction. Even better have the parts i need. Thanks in advance,
asked by: Zack E
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Q&A: Can Dexter Equalizer Trailer Suspension Kit # K71-359-00 Work on 2009 EZ Loader Boat Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Measurements For The K71-359-00 Dexter Heavy-Duty Suspension Kit
- Search Results: timken trailer bearings races seals caps
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Timken Replacement Bearing and Race Set - L68149 and L68111
- Shop: Grease Seal - Double Lip - 21325
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Performance Tool Carbon Fiber Digital Caliper Review
- Search Results: 168255tb
- Search Results: vault hub
- Search Results: vault
- Q&A: Inner and Outer Wheel Bearings and Seal for Tandem Axle EZ Loader Boat Trailer
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Video: Bearing Repacking and Grease Seals Installation
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - RG06-050 Review
- Q&A: Correct Grease Seal for a Boat Trailer that 10-19 Seal won't Fit
- Q&A: What is the Brand of the BK2-100 Trailer Bearing Kit
- Search Results: timken bearings
- Search Results: timken
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: l44649
- Shop: Suspension Enhancement
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
on Trailer Bearings Races Seals Caps
