bing tracking image
Q & A Icon

Parts Needed to Flat Tow a 2006 Suzuki Grand Vitara  

Question:

i have a 2006 suzuki grand vitara suv which has factory installed pull rings on the front of the unit the question i have is do they make a peace that hooks your pull bars to this pull ring or dose my car have to have modifacation

0

Expert Reply:

Sounds like you are looking for a way to flat tow your 2006 Suzuki Grand Vitara. You would need a base plate kit for that since there is no way I can recommend you flat tow your vehicle using the pull rings on the front of your car. For that you would need the part # 1018-1.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>