Will TorkLift Camper Front Tie-Downs On 2010 Toyota Tundra Fit 2008 Toyota Tundra

Question

Question:

My buddy is upgrading his truck for a new camper he bought and I am wondering about buying his torklift tie downs because I am thinking about getting a slide in camper. Will his front tie downs from a 2010 Toyota Tundra crew cab fit on my 2008 Toyota Tundra dblcab? His bed is 5.5 and my bed is 6.5. I searched the parts and it looks like they are different part numbers for the front tie downs, but the rear is that same. Before we bother taking them off and trying to swap them out I thought I would check with the experts. What are the differences between the two part #s? Thanks for your help.

asked by: Mitch D

0

Expert Reply:

The front tie-down for the 2010 Tundra you asked about is part # TLT2307, and the front tie-down for the 2008 is part # TLT2304.

I have attached a photo of each on e of the tie-downs and you can see they are designed differently and would not work as you wish.

The rear tie-down, part # TLT3304 is the same for both trucks you mentioned and there would be no problem moving those from the 2010 to your 2008.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

The TorkLift tie downs #TLT2309 and #TLT3306 installation instructions will be included. I went to our warehouse to look inside the box and instructions are included. See the picture I included on part #TLT2309.

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 7

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

The best and most secure camper tie down system that fits your 2016 Toyota Tundra 6.5 foot bed double cab is by far the Happijac system part #LC184089. This kit attaches to the truck frame instead of to the bed which provides a much stronger and more…

view full answer...

Answer 11

Hey Brian, so according to TorkLift they don't have any tie downs for the front but for the rear you are going to want the TorkLift Camper Tie-Downs #TL54FR. Since your truck has factory running boards that extend under the bed, there aren't…

view full answer...

Answer 12

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is confirmed to fit your 2024 Chevy Silverado 3500. This sway bar will minimize lateral movement in your rear end and improve stability. This sway bar is made in the USA and…

view full answer...