Recommended Plug-and-Play Wiring Harness for 2012 Jeep Liberty

Question

Question:

Hello, I have 2012 Jeep Liberty Jet without a towing package. Do you have a trailer wiring harness that will simply plug into the wiring? If so, what do I plug it into and what is the cost?

asked by: DAVE

0

Expert Reply:

I recommend the Tow Ready Custom Fit Vehicle Wiring Harness # 118554 for your 2012 Jeep Liberty. This harness will provide you with 4-way flat connector at the rear of your vehicle. It will plug into the back of each taillight assembly on your Liberty. You will need to route the black power wire to the positive battery terminal on your vehicle's battery. The fuse holder will install between the power wire and the positive battery cable. This wiring harness will not require you to splice into any of your vehicle's factory wiring.

I have attached an installation video of this wiring harness on a 2012 Jeep Liberty, as well as a help article on routing the power wire for you.

expert reply by: Victoria B

0

Answer 1

For the 2012 Jeep Liberty, I recommend the Curt Trailer Hitch #13245. This is a Class III rated trailer hitch with a 2 inch hitch receiver. This hitch has a maximum gross trailer weight of 5,000 pounds, but I recommend checking your vehicle's max…

view full answer...

Answer 2

I have seen this reported before and there is actually a note in the installation instructions on your Curt Front Hitch #C31020 where it talks about removing the oil filter and the interference with the front hitch. According to Curt, you must…

view full answer...

Answer 3

The Tow Ready Custom Fit Vehicle Wiring, #118384, is designed to fit if your 2011 Jeep Liberty already has a factory 7-Way and you want to replace it with a 4-Way. The connection point is located behind the factory installed 7-way trailer connector,…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

For your 2012 Jeep Liberty Sport 4WD, I recommend the Roadmaster EZ Base Plate Kit - Removable Arms #521433-1 to start your flat tow set-up. I've attached a video of this installation to help. For a tow bar, I recommend the Roadmaster Falcon 2…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Recommended Plug-and-Play Wiring Harness for 2012 Jeep Liberty

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching