16.5 x 6.5 -8 Trailer Tire Availability

Question

Question:

Im looking for 16.5 x 6.5 -8 tire and rim for Triton xt snowmobile trailer. Got any?

asked by: Tim

0

Expert Reply:

The size 165/65-8 is the modern size name for your 16.5 x 6.5 -8 so we have exactly what you would need.

If you have a 4 on 4 inch bolt pattern wheel currently you would want the part # AM3H200. If you have a 5 on 4-1/2 inch bolt pattern you would want the part # AM3H220 instead.

expert reply by: Jameson C

0

Answer 1

Boat trailer bunk boards like CE Smith #CE27840 can be secured to swivel brackets like #CE10000G-4 using either galvanized or stainless steel hardware intended for wood. This is not included so you will source the preferred hardware locally. Drilling…

view full answer...

Answer 2

All of the swivel brackets we carry use a 1/2 inch fastener (sold separately) to attach the bracket to the mounting surface. The holes to attach to the bunk board are 3/8 inch. You should use the appropriate sized wood screw or bolt to attach the…

view full answer...

Answer 3

For bunk brackets we have CE Smith Bolster and Swivel Bracket Assemblies #CE10000G-4 as well as others at different lengths. To attach the brackets to the trailer frame you can use U-bolts such as #CE15283GA-2 which are 3-13/16 inches long, 3-1/16…

view full answer...

Answer 4

The only roller bunks we carry, see link, come in 4 and 5 foot lengths. They can be cut to the lengths needed though. So for example if you needed a 9 foot section you could get 2 of the 5 foot models and cut off 12 inches of one to get 9 feet. For a…

view full answer...

Answer 5

The bunk brackets will attach to the trailer cross members using U-bolts. Since you don't need a swiveling bracket, the #CE10600G bracket you mentioned would work fine. I've provided a photo showing how the bunk board attaches to the bracket,…

view full answer...

Answer 6

So the U-Bolt will secure the CE Smith Light Duty, Vertical Bunk Bracket #CE10603G with the ends pointing towards the back of the trailer. If you look at the picture you took it looks like those fasteners holding your current brackets could be…

view full answer...

Answer 7

I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

16.5 x 6.5 -8 Trailer Tire Availability

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching