Installation Instructions for Curt # C55260 Trailer Wiring Harness on 1996 Jeep Grand Cherokee

Question

Question:

Im looking for installation for this particular harness

asked by: Chris Z

0

Expert Reply:

If you click the provided link, you can see the installation instructions for the Curt # C55260 trailer connector. Curt does a nice job of providing detailed color photos, which helps make the installation easier.

expert reply by: Mike L

0

Answer 1

The Curt trailer wiring harness #C55260 is designed for models of the 1996 Jeep Grand Cherokee that came with the factory tow package. It is possible that yours does not have the factory tow package so not all of the wiring is present. If you have…

view full answer...

Answer 2

In most cases you'll be able to tell whether or not your Jeep has the factory tow package because it came with an unbranded (no manufacturer) hitch and a wiring harness installed on the rear of the vehicle. Even if those two things…

view full answer...

Answer 3

On the product page for Curt trailer wiring harness #C55260 there is a section below Features called Installation that reads "This custom-fit T-connector plugs into your Jeep Grand Cherokee's factory tow package wiring harness, which is…

view full answer...

Answer 4

It is possible that the connectors for wiring harness #C55260 will be in a different location on your 1997 Jeep Grand Cherokee than what is stated in the instructions. You may have to pull additional panels out of the way or check the opposite side…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Installation Instructions for Curt # C55260 Trailer Wiring Harness on 1996 Jeep Grand Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching