Will the Thule Motion XT Cargo Box work with the Thule Aeroblade

Question

Question:

Does the Thule Motion XT Cargo box work with the Thule Aeroblade?

asked by: Geoff

0

Expert Reply:

Yes, the Thule Motion XT cargo box # TH629906 you referenced will work with the Thule AeroBlade crossbars.

I included an informative article about cargo management for you too.

If you let me know your year, make, and model of your vehicle, I would be more than happy to recommend a Thule roof rack for you.

expert reply by: Chris B

0

Answer 1

The Thule Force XT L Rooftop Cargo Box #TH6357B is 33" wide so it will take up at least that much space on your crossbars, but it's also important to remember that the lid will rotate out as well so you need to account for a little more…

view full answer...

Answer 2

The Thule Motion XT XL, part #TH6298B, is compatible with the Thule AeroBlade Edge, part #TH7503-TH7503. The clamps inside the Motion XT will clip to the roof rack and you can move the AeroBlade Edges to match these clamps position inside the box.…

view full answer...

Answer 3

I'd be more than happy to help you find the right sized roof box for your 2012 Volkswagen Jetta Sportwagen but in order to do so I'll first need to know what the distance is between your front crossbar and the line where the roof and the…

view full answer...

Answer 4

I just looked up the specs for the discontinued Thule Force XL 625, and Thule's owner's manual does not list a seal on the included parts list with the box. With that being said, if the rain was extremely heavy, it is possible that rain can…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Will the Thule Motion XT Cargo Box work with the Thule Aeroblade

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching