Replacement Vent Cover Availability for a RV Camper
Question:
I am looking to replace a rv camper vent cover. I also need to replace the rubber seal the one that goes on the lip of the vent do you have that item? I am not looking for the roll of seal and screws kit. thank you.
asked by: Francis S
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Products Referenced in This Question
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
more information >
Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- White
- MAXXAIR
more information >
Product Page this Question was Asked From
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White
- RV Vents and Fans
- Vent
- Roof Vent
- Manual Lift
- 4-1/2 Inch
- No Fan
- 14W x 14L Inch
- Plastic and Metal
- White
- Ventline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Replace an RV Roof Vent Cover
- Q&A: Question About a Product
- Article: How to Replace or Install an RV Roof Vent
- Article: Trailer Wiring Diagrams
- Q&A: Is there a Replacement for Dexter Nev-R-Lube Hub 008-386-80
- Q&A: Replacement Lid and Base for Dometic Refrigerator Vent
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Rooftop AC Units For A 3-Unit Dometic AC System
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Best RV Roof Vents
- Q&A: Comparing Furrion AC Units To Dometic Brisk Air II RV AC Units
- Q&A: Replacement Stud Recommendation for Dexter 6k Rated Trailer Hubs
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Maintenance Schedule