Are Snap-Loc Accessories Compatible with Erickson E-Track Tracks

Question

Question:

Are Erickson and Snap-loc products compatible? I need to purchase both e track and fittings that will fit the e track. Your website lists Erickson track but Snap-loc fittings.

asked by: M. A

1

Helpful Expert Reply:

Yes, the Snap-Loc accessories are compatible with the Erickson E-Track Tracks like part # E19146.

I have included a link to all of our E-Track tracks and accessories for you.

expert reply by: Leah S

1

Answer 1

To make a bed inside your aluminum 2 horse trailer I recommend going with E-Track #E19146. This single 4 foot long section is rated for 6,000 pounds of course this is the mounted weight, we just want to ensure that the trailer is rated above 2,000…

view full answer...

Answer 2

Erickson E-Track should be secured to the mounting surface with no fewer than 2 fasteners per linear foot per side, so for example a 3-foot section would need no less than 8 fasteners. The type and length of fastener depends on the mounting surface…

view full answer...

Answer 3

E-track offers a wood beam socket part #59149 which can fit in the vertical E-track part #E19146 that you referenced. This would be perfect for creating a second floor/deck in the trailer. I attached an install video for you to check out as well.

view full answer...

Answer 4

Your setup would be totally fine. Especially considering this is a bed application where the force will be straight down. Every third hole on the metal side and every other on the wood would be more than adequate and would be super solid.

view full answer...

Answer 5

Yes. The etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 8' Long #e62VR can be driven on without any issue and have a maximum capacity of up to 6000-lbs each(break strength), so they'll be able to handle your ATV/UTV without…

view full answer...

Answer 6

You will need 1/4" bolts for the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set, part #EM98CV. The length of the bolts will depend on your trailer, but I 2" bolts will work for most…

view full answer...

Answer 7

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…

view full answer...

Answer 8

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 9

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Are Snap-Loc Accessories Compatible with Erickson E-Track Tracks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching