Does Fulton Single Axle Trailer Fender Set with Top and Side Steps # F008585-2 Include Both Fenders

Question

Question:

Does item Code: F008585-2 include one left and one right or are they interchangeable side to side?

asked by: Larry J

0

Expert Reply:

The Fulton Single Axle Trailer Fender Set with Top and Side Steps # F008585-2 does include two fenders. These are not left- and right-handed so either fender can be used on either side of the trailer. This fender set is shown in the linked video.

We offer a range of fender mounting brackets and you can see all options by using the link provided.

expert reply by: Adam R

0

Answer 1

Yes! The Fulton #F008585-2 is compatible with the Galvanized Steel, U-Shaped, Bolt-On Brackets #PF1135-BKT-2 I've attached a helpful image that details the distances between the holes on this bracket. FYI, these brackets are a universal…

view full answer...

Answer 2

Based on your trailer tire size the Fulton Trailer Fenders part #F008585-2 would work very well for you. To see a chart with the fender dimensions see the attached picture.

view full answer...

Answer 3

You can mount the fenders directly to the trailer frame through the fender skirt on the back of the fender. I would recommend using large washers if you drill through the fender skirt and attach the fender directly to the trailer frame. If mounting…

view full answer...

Answer 4

I have checked with my technical contact at the manufacturer and according to him, the specifications sheet, as well as their catalog the measurement B for Fulton Single Axle Trailer Fenders with Top and Side Steps #F008585-2 is indeed 6.7 inches.…

view full answer...

Answer 5

Yes, the Fulton Plastic Fender, item #F008573, has two mounting slots for mounting brackets. These slots are 4 inches wide and have mounting holes on the inside that are 3-3/4 inches on center apart. From the inside of the fender to the center of…

view full answer...

Answer 6

The fender that you referenced, the Fulton Single Axle Trailer Fender #F008585, will allow for a 15 inch wheel. The fender measures 45 inches long x 10 -1/4 inches wide and 14-7/8 tall. After converting your metric tire size to inches, 9-3/16…

view full answer...

Answer 7

We don't offer a taillight specifically designed for use with the #F008585-2 fenders you'd looked at, but I've seen folks use taillights like the #STL78RB mounted to the rear of the fender step as shown in the provided photo.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...