Installation Instructions for Thule Xadapt2

Question

Question:

Do you have a video on how to use this adapter to install on an aeroblade bar?

asked by: Wendell

1

Helpful Expert Reply:

We have not had the chance to install the Thule Xadapt2, # Xadapt2, yet so we do not have a video. I did include the installation steps in a picture for you though.

there is a separate set of instructions if you have a Volkswagen. I will also send you a copy of the instructions in a separate email.

expert reply by: Michael H

1

click to enlarge

Answer 1

Yes there is. I did some research, and it appears you have the Thule BigMouth Bike Rack. To adapt your bike rack to your Thule WingBar Evo Crossbars #TH711220 you will just need to use the: -Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for…

view full answer...

Answer 2

The Thule #Xadapt1 will allow you to fit your Sidearm bike rack on your Thule Wingbar Evo crossbars.

view full answer...

Answer 3

I recommend using the Thule Load Bar Adapter for Peloton and Echelon Bike Racks #THXADAPT9, which was confirmed by my contact over at Thule. You could also use the Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers…

view full answer...

Answer 4

I attached the install instructions for the Thule XADAPT9 part #THXADAPT9 that you referenced which I hope clears up the issue you are experiencing.

view full answer...

Answer 5

The hardware you need for your first generation Thule Flat Top Ski Carrier (model number 725) is the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998, as you mentioned. You will also need four of the Replacement Round Nut for…

view full answer...

Answer 6

For attaching a Thule 725 ski rack to a set of Thule Aeroblade crossbars the adapter you'd need is the part #Xadapt2 which we have confirmed with Thule. This is only solution we can guarantee will work.

view full answer...

Answer 7

You do not have to use the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998 with your older Thule 725 Flat Top since your Thule WingBar Evo Crossbars #TH711320 have an integrated t-track on the top of the bars. The Mounting…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Installation Instructions for Thule Xadapt2

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching