Trailer Hitch Recommendation for a 2014 Lincoln MKZ Hybrid
Question:
Would a class II work or do you suggest a class I? I know the regular hitch is a 1.25inch X 1.25inch hitch. The other question is what would you suggest if it is for towing I.E. stay under 500 total weight with a tongue weight of 200?
asked by: Bart
Expert Reply:
I would recommend you go with a Class II hitch over a Class I hitch. The capacities will be higher and more hitch accessory options will be available. For example, with a Class I hitch you can only carry up to 2 bikes, whereas with a Class II you can carry up to 4. I attached a help article that covers the differences between hitch classes for you to check out as well.
For a hitch I would recommend the Curt Hitch part # C12091. This is a Class II hitch that would work well towing a trailer with 200 lbs of tongue weight. Be sure to check the owners manual of your vehicle to determine the towing capacities and be sure not to exceed these figures. This hitch as a 350 lb tongue weight capacity and a 3,500 lb total trailer weight capacity. I attached an install video for you to check out as well.
For a ball mount I recommend part # C45016. This ball mount has a 2-5/8 inch rise or 3-1/4 inch drop and measures 9-3/8 inches from the center of the hitch pin hole to the center of the ball hole.
For a 1-7/8 inch hitch ball I recommend part # 19256, and for a 2 inch ball I recommend part # 19258.
If trailer wiring is needed I recommend the Curt Custom Fit Wiring, part # C56258.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Standard Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Search Results: standard hitch pin
- Shop: Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Shop: Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Base Plate for Tow Bar
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 90160
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Search Results: trailer hitch
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Search Results: brake controller
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Trailer Wiring Diagrams
- Shop: Gooseneck Hitch
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Crosstrek
- Search Results: 5504