Distance Mounting Plate to Bottom of Wheel Extended and Retracted for Dutton Lainson Jack # DL22300

Question

Question:

I have a wood splitter, wanting to get a down wheel jack for it. you have one #DL22300. will this work. how far down will it the tongue and how high for hookups..

asked by: Joyce B

0

Expert Reply:

From the center of the mounting plate down to the bottom of the jack wheel on the Dutton Lainson Jack part # DL22300 this jack measures 13 inches. This jack has a lift of 10 inches so when fully extended it will go up to 23 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

From the center of the mounting bracket down to the bottom of the wheel of the Dutton Lainson Jack part #DL22300 that you referenced measures 13 inches. You'd want to compare the height of your trailer coupler to the ground when it sits level…

view full answer...

Answer 2

There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options:…

view full answer...

Answer 3

The Dutton Lainson jacks are all made in America. I attached a link to a page that has all of the Dutton Lainson trailer jacks we offer. A very popular option is the part #DL22300 which is made in America.

view full answer...

Answer 4

Base plate kits are somewhat time consuming but they aren't too terribly long. I once asked our install guy that's been here forever how long to set aside for a base plate kit install and he said a "long afternoon" and you'd be…

view full answer...

Answer 5

Yes. The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K #AKUBRK-35-D are compatible with the Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized #8-247-50.…

view full answer...

Answer 6

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 7

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

view full answer...

Answer 8

For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…

view full answer...

Answer 9

The expert reply you were looking at is correct. The only way to confirm if your 2019 Acura RDX has the plus 12 volt power provision is by removing the interior trim and seeing if the factory connector has one or two red wires. I can completely…

view full answer...

Answer 10

While I do not have any way to look up the parts used in the construction of your 2004 Weekend Warrior Super Lite FS 2300 I do see it has a GVWR of just over 7,000lbs which means you likely have 3,500lb leaf springs under your trailer. You will need…

view full answer...

Distance Mounting Plate to Bottom of Wheel Extended and Retracted for Dutton Lainson Jack # DL22300

Product Page this Question was Asked From

Continue Researching