Does the Thule Replacement Rear Retention Include the Strap

Question

Question:

Does the Thule T2 Rear Retention come with the strap included as shown in the photo?

asked by: Damon

1

Helpful Expert Reply:

Yes, the Thule replacement rear retention # 7521568001 includes the strap.

expert reply by: Chris B

1

Answer 1

I do have a solution for you. I was able to speak with my contact over at Thule who informed me that the 916XTR bike rack does not have just the replacement strap available. However, the Replacement Fat Tire Rear Wheel Holder & Strap #7521568001…

view full answer...

Answer 2

The rails that the rear wheel holders fit on is different between the Thule T2 Pro and the T2 916XTR so #7521682001 is not a fit for the 916XTR. Instead you can use #7521568001 which does fit. The strap and buckle are included so it will fix your…

view full answer...

Answer 3

Yes the replacement wheel tray part #7521568001 will work on your 700 x 38 tire. While your tire is narrower than what this can fit it will still work just fine.

view full answer...

Answer 4

The Replacement Rear Wheel Tray for Thule T2 Hitch-Mounted Bike Racks 753-3582 that you're looking for has been discontinued and is no longer available. Instead, that part has been replaced with the Replacement Fat Tire Rear Wheel Holder &…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Does the Thule Replacement Rear Retention Include the Strap

Product Page this Question was Asked From

Continue Researching