Replacement Plunger Pin Recommendation for a Bulldog Landing Gear Square Jack
Question:
I need a pin repair kit for the extension leg for my 182800h jack. I would guess it would consist of a pin with a arced handle, spring, washer, cotterpin. my jack is perfect otherwise can you help me?
asked by: Ray V
Expert Reply:
For a Bulldog 180 series jack you will need replacement drop leg pin # BD500177. It includes the spring, cotter pin, and washer. You should not have to remove the inner drop leg to replace the pin and spring. Start by pulling back on the pin. Then use whatever tool will fit to pull out the cotter key. Then everything should come out.
Then you will put on the spring, washer, and the cotter key goes on last to hold it all in place so put it back in the way that it came out.
Products Referenced in This Question
Replacement Drop-Leg Pin for Bulldog Heavy-Duty Square Jacks - 3/4" Diameter
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Pins and Clips
- 3/4 Inch Plunger Pin
- Bulldog
more information >
Continue Researching
- Shop: Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Shop: Replacement Drop-Leg Pin for Bulldog Heavy-Duty Square Jacks - 3/4" Diameter
- Video: Review of Bulldog Replacement 3/4 Inch Drop-Leg Plunger Pin Kit Heavy-Duty Square Jack - BD500177
- Q&A: Replacement Bulldog Tandem 2-Speed Jack Recommendations
- Shop: Trailer Hitch
- Shop: Grease Seals 10-36 (pair)
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Seal With Dimensions to Replace 171255UC
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Chevrolet Equinox
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
- Search Results: 25580
- Shop: Brake Controller
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Shop: Gooseneck Hitch
- Article: Trailer Tire Sizing
- Q&A: Replacement Multi-Function LED Trailer Light for Glo-Brite 9852-88
on Trailer Jack
