Is a Special Tool Required to Un-clip a Factory 7-Way Connector from the Vehicle Wiring
Question:
I have a 2005 Silverado 1500 4x4 Crew cab. It has the Factory towing package. The receptical has a short and I want to order a replacement receptical. The wiring harness on my vehicle runs forward fast the fuel tank area. So I have tried to unplug the harness from the back of the receptical without success. Do I need a special tool for this?
asked by: Gary G
Expert Reply:
There is not special tool required, but these connectors can be stubborn, especially with years of road grime built up. You may be able to make things easier on yourself by removing the receptacle from the rear bumper and giving yourself some slack. You may need to use a screw-driver to pry the locking tab up far enough to get the connector to release, be careful not to break the tab. If you do break the tab, you can wrap the connection in electrical tape to hold, but it will be more difficult to replace in the future.
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Article: Types of Bumpers
- Shop: Bumpers
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: Curt Replacement OEM USCAR Trailer Connector - Dual Connection - 7-Way RV Style and 4-Way Flat
- Shop: Pollak 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Curt 6-Way Round LED Circuit Tester - Vehicle End
- Video: Review of CURT Trailer Wiring - Trailer Connectors - C42JR
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Installation - 2020 Chevrolet Silverado 1500
- Video: Trailer Hitch Installation - 2006 Ford Ranger - Curt
- Video: Curt Echo Mobile Trailer Brake Controller Installation - 2019 Ford Ranger
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Review
- Video: Review of Westin Bumper - Replacement Step Bumper - 20009
- Video: etrailer.com Trailer Hitch Installation - 2012 GMC Sierra
- Q&A: 2021 Ford Ranger XLT Wiring Harness with or without Power Wire
- Q&A: Recommended 7-Way Connector for a 2021 Ford F-150 w/ a Factory 4-Way
- Q&A: When Installing the Curt C56431 on a 2019 Ford Ranger Does the Factory 4 Way Still Work
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended 7-way Connector For 2019 Ford Ranger W/ Factory 4-way Connector
- Shop: Vehicle Lights
- Q&A: Removing the 7-Way Trailer Wiring Plug from the Housing, 2010 Chevy Silverado with Factory 7-Way
- Q&A: Removing Old Plug and Installing 7-Way Trailer Connector # PK12706
- Shop: Durabilt Transport Chain w/ Grab Hooks - 3/8" Thick Links - 20' Long - 7,100 lbs
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Testing Brake Controls
- Search Results: winch
- Search Results: trailer ramps
- Search Results: mega ramps
on Custom Fit Vehicle Wiring
