7-Way Trailer Wiring Recommendation for 2017 Chevy Colorado

Question

Question:

Will your part # HM40975-11998 wiring harness assembly work on a 2017 Chevrolet Colorado?

asked by: Jim H

0

Expert Reply:

Your 2017 Chevy Colorado might have the round socket already to allow the part # HM40975 to install without needing the wiring harness.

But if you did not have the connector the part # HM40975-11998 will fit and work well. Check out the install video I attached for more info on how this installed on a similar 2016 Chevy Colorado.

expert reply by: Jameson C

0

Answer 1

The Tekonsha wiring harness item #22124 for your 2021 Ford Ranger XLT uses a power lead because they feel like it's needed but the Curt harness item #C56431 will work just fine and eliminates that extra step during installation. I recommend using…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

To use the Curt Echo Wireless Trailer Brake Controller #C51180 on your 2019 Ford Ranger with a factory 4-way connector you will need to install the Tekonsha 7-way connector #22124. This connector includes a harness custom made for your vehicle and…

view full answer...

Answer 4

That doesn't sound right at all and I would be happy to help you. Since your 2021 Ford F-150 has a 4-way connector all you will need is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item…

view full answer...

Answer 5

It is possible to have both a 7-way and 4-way on your 2019 Ford Ranger by using the #C56431 but you will need to replace the 7-way connector with the #C55774 and you'd have one that has both. This uses the same round connector as what comes with…

view full answer...

Answer 6

There is not special tool required, but these connectors can be stubborn, especially with years of road grime built up. You may be able to make things easier on yourself by removing the receptacle from the rear bumper and giving yourself some slack.…

view full answer...

Answer 7

We have exactly what you need! The Hopkins part #HM40975 is a direct replacement for the OEM 4-Way/7-Way connector on your 2019 Ford F-350 and is cost-effective so you don't have to sell any limbs. Attached is a review video for you to check…

view full answer...

Answer 8

To install trailer wiring on your 2020 Ford Ranger I recommend the T-Connector #C56431 which tees into your OEM wiring underneath the vehicle on the driver's side. We actually had the opportunity to install this on a 2020 Ranger and I'm…

view full answer...

Answer 9

The best way to cut the opening for the Hopkins #HM40975 is just to use a dremel, which will make it really easy.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

7-Way Trailer Wiring Recommendation for 2017 Chevy Colorado

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching