Hopkins 7- and 4-Pole Trailer Connector Socket Installation - 2019 GMC Canyon Video

To start you will need a base plate, I recommend the Blue Ox Base Plate Kit - Removable Arms #BLU93FR. It is a hidden and sturdy design to spread towing force evenly to prevent stress on the towed vehicle. Next you will need a tow bar and safety…

I recommend installing the Class III Curt Trailer Hitch Receiver #C13176 on your 2019 GMC Canyon because it is an easier installation than most of the other options and it has the safety chain loops located under the receiver for easier access. I…

That doesn't sound right at all and I would be happy to help you. Since your 2021 Ford F-150 has a 4-way connector all you will need is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes. The Curt #C56431 tees into the existing factory wiring and will leave your factory 4 way connected, so you'll still have the ability to use that for towing as well. I've linked the installation video of this harness for you to have a…

To use the Curt Echo Wireless Trailer Brake Controller #C51180 on your 2019 Ford Ranger with a factory 4-way connector you will need to install the Tekonsha 7-way connector #22124. This connector includes a harness custom made for your vehicle and…

There is not special tool required, but these connectors can be stubborn, especially with years of road grime built up. You may be able to make things easier on yourself by removing the receptacle from the rear bumper and giving yourself some slack.…

To install trailer wiring on your 2020 Ford Ranger I recommend the T-Connector #C56431 which tees into your OEM wiring underneath the vehicle on the driver's side. We actually had the opportunity to install this on a 2020 Ranger and I'm…

It is possible to have both a 7-way and 4-way on your 2019 Ford Ranger by using the #C56431 but you will need to replace the 7-way connector with the #C55774 and you'd have one that has both. This uses the same round connector as what comes with…

We have exactly what you need! The Hopkins part #HM40975 is a direct replacement for the OEM 4-Way/7-Way connector on your 2019 Ford F-350 and is cost-effective so you don't have to sell any limbs. Attached is a review video for you to check…

Your 2017 Chevy Colorado might have the round socket already to allow the part #HM40975 to install without needing the wiring harness. But if you did not have the connector the part #HM40975-11998 will fit and work well. Check out the install video I…

The best way to cut the opening for the Hopkins #HM40975 is just to use a dremel, which will make it really easy.