Hitch Recommendation for a 1993 Ford F150

Question

Question:

hitch for my 1993 F-150? Short bed, V-8. Thanks.

asked by: Gene W

1

Helpful Expert Reply:

The Curt Hitch part # C15300 that you referenced has been confirmed to fit your 1993 Ford F-150 so I would recommend it for you. I attached an install video for you to check out as well.

expert reply by: Jameson C

1

Answer 1

From where the B and W hitch part #BWHDRH25198 attaches to the frame of a truck down to the top of the hitch opening measures 7-3/8 inches.

view full answer...

Answer 2

Yes, check out the picture I attached that has the vertical distances from where the hitch mounts to the frame of the vehicle down to the hitch tube. Since you need at least 6 inches this would clear that by 1-3/8 inches.

view full answer...

Answer 3

I spoke with a representative of Curt, who told me that Curt hitch #C15300 may require the repositioning of the spare tire on your 1992 Ford F-250, depending on the width of your spare tire and if you have a short bed or long bed. With a short bed,…

view full answer...

Answer 4

I spoke with my contact at Curt to obtain the mounting bolt hole locations for the Trailer Hitch Receiver, #C15300 on a 1993 Ford F-150. I have attached a picture to illustrate these measurements. As for repositioning the spare tire, you may need to…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C15300 is designed to fit the 37-1/4 inch frame width of a 1993 Ford F-250 or F-350 pickup with a standard bumper. I have added a link below to a video install on a similar model year F-250, as well as a link to the…

view full answer...

Answer 6

The distance between the mounting holes from left to right on the Curt hitch part #C15300 that you referenced is 35-7/16 inches.

view full answer...

Answer 7

From the mounting surface down to the hitch tube of the Curt Hitch part #C15300 that you referenced measures 5.63 inches.

view full answer...

Answer 8

I have attached a photo of the B&W Heavy-Duty Trailer Hitch Receiver, part #BWHDRH25198 you asked about. I have noted the mounting holes on the photo you can check out. The distance center-to-center from the front mounting hole to the second is…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Hitch Recommendation for a 1993 Ford F150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching