BOLT Trailer hitch Receiver Lock for a 2015 GMC Sierra 1500

Question

Question:

2015 sierra looking for lockable BOLT Trailer Hitch Receiver Lock for 2inch and 2-1/2inch Hitches. do you make it yet? thanks

asked by: Bill

0

Expert Reply:

For your 2015 GMC Sierra you will need BOLT hitch receiver lock # BL7023582 for 2 inch and 2-1/2 inch trailer hitches.

expert reply by: Michael H

0

Answer 1

The only trailer tire sensors that will work with the factory TPMS on your 2021 GMC Sierra 3500HD Denali is the GM kit 85110397 that is sold through GM. These sensors will need to replace the valve stems on your trailer wheels. I recommend staying…

view full answer...

Answer 2

The Dealership is correct that the 2021 GMC Sierra is not going to send power back to the 7-way unless it senses a load. Since your trailer wiring is chewed up, the 7-way is most likely not sensing a load. The fix for this would be to use an older…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 12

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

BOLT Trailer hitch Receiver Lock for a 2015 GMC Sierra 1500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching