Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (90 Customer Reviews)
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.These large lights sure help to see when we’re braking or turning. We mounted them high on each side of our 3021 fifth wheel and they match grand design factory lights exactly! Exepy that they’re longer which is what we wanted. We’ve had them a year now and they’re still holding up well
eTrailer had this difficult to find light which was a replacement on my Wolverine trailer. Shipping occurred timely and I received the extra light I needed. ETrailer has become my "go-to" source for all my trailer lighting needs
Sam
4/7/2024
One year later the light is still working great, no issues what so ever so it is a good qualitly light
Product is of good quality with no issues after one year of multiple uses.
Exactly what I wanted. My 2021 Momentum 31G toy hauler came with one 12" light on each side. I'm going with two of these on both sides for good visablity at night or in poor visibility. And the price was very reasonable.
Nice light, fits the bezel well. Reverse lights are sufficient brightness. Be advised that the lights are sold as single not pairs.
Just what I needed to add an additional safety/signaling light in a car towed on a car dolly.
The lights show very clearly through the tailgate window.
Well I haven't had them long enough to review their longevity, but based on the installation and initial thoughts, these were a great choice for replacement taillights on my Utiline Dodge (Stepside to the Chevy lemmings).
Well thought out. Great producy
The item I ordered was an exact replica of what I had. I ordered it and had it within a week. Very pleased thank you
Communication was unreal, nobody is this good these days.
Product looks better than online. Looking forward to installing this as taillight for our Newell Coach.
They are nice and bright add 2 of these to each side of my RV easy install and work great
Exact replacement and easy to install.
Lights are amazing!! They look awesome on my Newell Coach.
After owning these lights for just over a year they are still in excellent condition I'm very satisfied with my purchase
I love these lights and get a lot of compliments. They were easy to install and are very bright!!
I like the light anD IT WORKS VERY WELL.
The part was correct for what we needed.
Great replacement for upper taillights on 2006 Winnebago
Shipping was fast. Looks like quality products. Haven't hooked up anything yet.
Bought 4 stacked 2 on top of each other and placed o. Flatbed truck. They work awesome, very bright. Bought some small resistors from [online retailer] to cure the hyper flask. Best deal I found that had the reverse lights made in with them.
Bright, easy to install four wire system (ground/tail/stop/backup). I added these high on the sides of the tailgate frame for better visibility in traffic and to retain visible hazard lights when the tailgate is down during loading/unloading.
I purchased the Obtronics STL264RBLED light as part of a LED upgrade plan for my enclosed utility trailer. I am using the light for both running and brake light function at the top of the trailer. etrailer expert Adam R recommended I use the 118158 vehicle-to-vehicle tail light converter to prevent the turn signal feature from interacting with the brake light function.
The etrailer staff and I talked several times about potential incompatibility issues of the LED bulbs with the Can Bus circuitry found in new vehicles. Between etrailer and the light manufacturer, I feel confident the light fixtures I purchased will function without concern.
These are bright. Backup lights are also worth the effort.
Look very good, really like the integrated reverse lights, nice and bright.
I B.
9/8/2021
Still working great. The only issue I had was the rapid flashing, not the fault of the lights. If you have a vehicle like my 2011 Dodge Dakota, in which the turn signal flasher is part of the computer, and you cant just put in an electronic flasher. I ended up installing a diode inline to control that. No big problem. happy with them.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ana
12/4/2023
One year later and we’re still very pleased with the tail lights