Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base
(553 reviews)
Price: $3.38
In Stock
Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base
Item # MC32AB
Retail:$14.83
Our Price: $3.38
You Save: 77%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (553)
- Q & A (0)
- Photos
Optronics Trailer Lights - MC32AB
- Clearance Lights
- Rectangle
- Incandescent Light
- Amber
- 4L x 2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.
Features:
- Rectangular trailer light serves as either a side marker light or a clearance light
- Amber acrylic lens with reflex reflector
- Lens is replaceable
- White ABS plastic base
- Incandescent bulb
- Mounts on surface of trailer - hardware not included
- Twist-in bulb socket with power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4" long x 2" tall x 1-1/8" deep
- Power draw at 12.8 volts: 0.2 amps
- Mounting hole dimensions:
- Center to center: 3"
- Mounting hole diameter: 1/4"
- 3-Year warranty
Note: A hole must be drilled on the mounting surface for routing the wiring and for the base of the bulb to sit into.
P2-Rated or P3-Rated Lights
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MC32AB Optronics Rectangular Side Marker/Clearance Trailer Taillight with Reflex Reflector - P2 Rated - Amber Lens - White Base
Alternate part number: MC-32AB
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base - MC32AB
Average Customer Rating: 4.8 out of 5 stars (553 Customer Reviews)
4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.by: 01/02/2024
Items arrive broken because they put them loose in the same box with spring hangers!
by: John 02/13/2024
Perfect fit to replace the cover of one on our 2017 Micro Lite. Thank you!
by: Texas Badger12/31/2016
I have bought many products gor our camper from etrailer from hitchesyo lihht bulbs. Always great service at reasonable prices, usually 30 to 50% lower than local RV dealers.
Texas B.
1/2/2018
The lights are great.The only problem Ive had is there is no built-in backup warning to keep me from backing the trailer into things and breaking the lens. LOL
by: Gregory03/27/2013
These lights are really good for the price! (I ordered 16)
They aren't cheap feeling or flimsy.
They feel sturdy, durable and they look quality.
The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing.
The light is sealed very well and it takes some effort to remove the lens cover.
The lens is thick and the color is true. The reflector is bright.
I was genuinely impressed with lights especially for the cost.
These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home.
My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth.
These MC32RB and the Amber version lights will look great!
Slightly different style, same size and better looking and better quality than the originals.
Very happy with lights and etrailer.
Will be ordering more items.
Thanks.
G.
by: April 04/29/2024
Perfect fit and we received them quickl y.
by: Phil M07/15/2017
I purchased red and amber lights to replace the faded and broken ones on my travel trailer. Camping World wasn't able to help me. Found you all while searching the internet. Great produce. Great price. Better than the originals. The screws that secure the lights to the trailer are protected from the weather (they are under the removable lens. Easy to install. Ended up replacing all eleven lights.
Phil M.
7/15/2018
Work and look great. Again, installation was easy.
by: Ron 02/07/2024
My new light looks EXACTLY like the ones installed twenty three years ago. Hu
by: Chuck 02/07/2024
Received on time and was the correct part. Will use them again.
by: James10/23/2023
Lights area perfect match for the existing ones on my travel trailer.
by: Jon08/03/2023
1 of the 2 trailer lights was missing the bulb
by: Nancy03/22/2024
Fit perfectly
by: Harvey 09/09/2023
great part fit perfect price was very low will must definetly use e-trailer for all my trailer parts
by: Leroy09/01/2023
Good price and arrived when etrailer said it would. What more can you ask for?
by: Mark B02/14/2024
Awesome service!
by: Angela W.07/11/2013
Tracking let me know when to expect these. They arrived on time, and in good shape. Installed them, and they work great. Bright bulbs, simple install. Great price too! Thanks again!
by: Vincent 07/07/2023
E trailer has always treated me excellent. Itis the first place I check when I need something
by: Jack05/04/2020
I ordered 7 lights for my trailer and was pleased with the lights and the quick delivery.
by: Roy 04/25/2023
The receipt of the trailer reflective light received today (2DAYS) before expected made my 82 year old life a lot easier. Now I can pass inspection before my registration runs out. Thanks to all involved you made an old man very "HAPPY"
by: Steve 11/15/2023
As advertised
by: Ed07/22/2022
Just as expected. Thank you.
Ed G.
7/23/2023
Still looking good.
by: Mike06/07/2023
Glad I found etrailer! great service..
by: Rich S.09/11/2017
I have a trailer that did not meet DOT Regs. I needed to install amber side lights. Your amber light mc32ab was just perfect for what I wanted. Very low price and the light fit on the side of the trailer with no problem. Very good light for the money.
Rich S.
9/12/2018
I have had no problem at all. The light holds up well and still looks new.
by: Mark 08/24/2023
Just got my product today. Ordering and shipping was fast and easy. Price was excellent. Thank you.
by: TECTim03/14/2017
I ordered this part to replace a broken one on my 5th wheel RV. It fit perfectly. Great price and delivered within just a few days. I only wish it was made in America.
Tectim
3/14/2018
Still working. It looks just like the original light It replaced.
25
553
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Lights Needed on 12 Foot Long x 83 Inches Wide Dump TrailerI can certainly help you find all of the parts needed to rewire your dump trailer and we do have a lighting kit that will work for you. However we do not have any kind of plug-and-play rewiring kit. The taillight kit I recommend for you is the Optronics Waterproof, Over 80 Inch LED Trailer Light Kit with 25 Foot Wiring Harness # TLL16RK. This kit includes 2 red LED taillights with the functions needed for trailers over 80 inches wide. The included wiring harness has 25 feet of wire to...
view full answer... - Parts Needed to Add Lights to 50 Foot, Triple Axle Trailer with No Existing LightsThanks for the photo of your trailer! The taillights I recommend for your trailer are the Optronics Over 80 Inches, Rectangular Submersible Trailer Tail and License Light, Left-Hand # ST17RB and the Right Hand # ST16RB.These lights will provide you with the stop/brake light, tail light, turn signal, rear reflector, license plate lights, rear side marker lights, and rear side reflectors needed for trailers 30 feet or longer. For front side clearance lights and reflectors as well as intermediate...
view full answer...
- Clearance Trailer Lights With Replaceable Lens RecommendationWe do have clearance lights that may work for you. The clearance lights we offer come in amber or red and we have either 1 or 2 bulb units. You mentioned you like the 2-bulb feature on some clearance lights. I recommend part # MC66RB. This light comes with 2 incandescent bulbs and has a red lens. The amber version of this light is part # MC66AB. Both of these lights use the replacement bulbs, part # A194B. These are push-in bulbs. The replacement lens for the red light assembly is part...
view full answer...
- Replacement for Reflect-O-Lite 400The Reflect-O-Lite line has been discontinued for quite some time so replacements are no longer available. However, the Trailer Clearance or Side Marker Light w/ Reflex Reflector part # MC32AB is a very similar option that will work well in its place. In regards to installation, all you will need to do is mount the base with a screws part # 1131832 and then match up the wires with butt connectors part # DW05744-5.
view full answer... - Amber Clearance Trailer Light to Match Optronics # ST31RBWe don't carry an amber light that's the exact as the # ST31RB but one that is quite close is # MC32AB. Another option is to replace the lens with # A30AB which is the amber lens that fits the # ST31RB.
view full answer... - Are Separate Ground Wires Needed to Install Multiple Optronics Trailer Lights # MC32RB and # MC32ABAs long as your trailer is not aluminum or fitted with a folding tongue mechanism you should be fine running each light's ground wire to the trailer frame. You'll want to make sure that you have a clean bare metal surface on the frame for each light's ground. Each one needs to make solid metal-to-metal contact. By the same token, you will want to ensure that your main trailer wiring harness ground wire is also solidly affixed to a clean bare metal spot on the frame, since this wire will...
view full answer... - Replacement Lens for Clearance/Side Marker Light for a 2001 Coleman Pop-Up CamperIf the light on your 2001 Colman pop-up camper is an Optronics # MC32AB or a Peterson TW2549A this replacement lens # A32AB is the correct fit. If you are not sure which light you have the number might be on the housing somewhere, likely the back, but not on the lens. That is a different number. If there are no part numbers on the light housing then I would need to know the dimensions of the light you have to determine if this or another lens will fit.
view full answer... - Replacement For A SAE-A-P2-72 Trailer LightWe do offer the Optronics trailer light # MC32RB for red and # MC32AB for amber. These lights will be extremely similar to the # MCL31RB that you mentioned, but they are a bit more square on the ends. The mounting holes on the # MC32RB are 3" apart on center which should be fairly standard. This # MC32AB and # MC32RB appear to be what you are looking for.
view full answer... - Replacement Lens for Trailer Light 22368-022I had a hard time finding a lot of information using the two part numbers you found both on the lens and the light base. It looks like the base number may refer to the Optronics Trailer Light # MC32AB, for which the correct replacement lens is part # A32AB. To be sure you can take a couple quick measurements on your existing lens. This lens measures 4 inches long, 2 inches wide, and 1/2 inch tall. If this does not look to be the correct lens please feel free to email me a picture of...
view full answer... - Recommended Clearance Marker Lights Compatible with 1999 Coachmen Viking Pop-Up Camping TrailerThe Rectangular Trailer Clearance, Side Marker Light with Reflector - Red # MC32RB will work on your 1999 Coachmen Viking Pop-Up Camper for the rear side clearance light. If you want the front clearance marker as well, you will want # MC32AB. Both of these lights are 4 x 2 inches and have mounting holes 3 inches on center.
view full answer... - Optronics MC32 Series Amber Light with Black BaseYes, I checked with Optronics and you can get the MC32 series amber light with a black base, # MC32ABB.
view full answer... - Trailer Clearance or Side Marker Light That Belongs To Replacement Amber Lens A32ABI believe you are asking about the Replacement Amber Lens for MC32AB Trailer Lights part # A32AB. The light that came with this lens is Trailer Clearance or Side Marker Light w/ Reflex Reflector part # MC32AB. I believe that is what you are asking for. Please let me know if you are referring to something else.
view full answer... - Replacement Lens for SAEAP2 16 DOT Clearance Light The number you provided from the lens, SAEAP2 16 DOT states that the lens is compliant with DOT regulations, but in most cases it won't help us identify the lens. However, we've gotten enough inquiries about this lens that I can identify the replacement as # A32AB which is the replacement lens for the Optronics # MC32AB lamp. You can confirm this by looking at the housing of the existing lamp which should have the part number printed on it somewhere. The lens measures 4" L x 2" W x 1/2" H.
view full answer... - Best Replacement for Micro-Flex 349 Trailer Clearance LightThe best replacement option we offer for a Micro-Flex 349 Trailer Clearance Light is the Trailer Clearance or Side Marker Light part # MC32AB which is not the exact same shape but very similar and almost the same size. It also uses the same mounting pattern so there will be no new drilling into the trailer required.
view full answer...
- Replacement Amber Light for a Carry On TrailerWe should have a good replacement for your Optronics light, but I was unable to find anything using the SAE number provided, unfortunately. With that said, you will need to measure your current light to find the direct replacement. Something like the Optronics Trailer Clearance or Side Marker Light w/ Reflex Reflector # MC32AB will measure 4 inches long, 2 inches tall, and 1-1/8 inches deep (diagram below). As a side note, a lot of Optronics' lights have part numbers printed on the back...
view full answer...
- Replacement Lens For Amber Clearance Lights On 2005 KZ Jag CamperSince there are so many different lights that are used on trailers it is nearly impossible to track down what lights are used on a specific model. You may be able to find the manufacturer and model number on the base of the light and that would help us research and see if we can find a replacement lens. Another way is if you measure the lens and let me know as well as how it is attached to the light. A third option is to replace the light. A lot of customers choose this option rather...
view full answer... - Recommended 4 inch by 2 inch Clearance Light for TrailerSAE numbers aren't reliable ways to track down trailer lights unfortunately. But if you can get me a picture of the light I am sure I can find it. A very common light that matches the 2 inch by 4 inch dimension is the part # MC32AB.
view full answer... - How To Tell If A Trailer Light Lens Will Fit On A 2002 Coleman Pop-Up CamperYou will need to measure the lens that you are replacing or if you can get the part number from the light housing on the Coleman pop-up camper. The trailer light lenses are not listed by the brand of trailer. They are listed by size and part number of the trailer light it will fit. The Replacement Amber Lens for MC32AB Trailer Lights, part # A32AB, is 4 inches long by 2 inches wide by 1/2 inch deep. It fits the Rectangular Trailer Clearance, Side Marker Light with Reflector- Amber, part...
view full answer... - Availability of a Trailer Light with SAE Number SAE AP2 01The SAE number of a trailer light isn't always the best way to pick out a replacement light since that isn't a part number. But most likely you are looking for a # MC32RB which measures 4 inch by 2 inch. If not, check out the link I attached that has all of the trailer lights we offer.
view full answer... - Replacement Lens for 4 x 2 Inch Amber Trailer Clearance LightWe have replacement amber lens # A32AB which fits on 4x2 inch light # MC32AB. This is a more rounded design. What I recommend, if this lens does not appear to be a match, is to take a look at the 4x2 inch amber clearance lights that we carry, see link, to determine if any match your 1978 Fleetwood. It would probably be more beneficial to just replace the whole light assembly.
view full answer... - Replacing Clearance Lights On A 2020 Grand Design Imagine 2979RLI can certainly point you in the right direction. Looking at these 2020 Grand Design Imagine campers, the clearance light appears to be very similar to the Optronics # MCL0032ABB. This is a 4" long 2" tall and 1" thick amber clearance light with a black base. We also have it available with a while base # MC32AB. If you can measure one of your clearance lights, you may find that this light is virtually identical. If you find that a different size light is needed, feel free to send me some...
view full answer... - Is a LED Upgrade Available to Replace the Rectangular Trailer Side Marker Light # MC32ABOptronics does make a LED light that is close to the same size as the, # MC32AB. Check out the Sealed, Rectangular LED Trailer Clearance and Side Marker Light, # MCL49AB. I have also provided a link to a video review showing this light in action. If this Light is not what you are looking for, I have provided a link to all of the LED, rectangle, amber clearance lights that we have at this time.
view full answer... - Does The Optronics Trailer Clearance Light # MC32AB Include a BulbThe item you selected, Optronics Trailer Clearance Light, part # MC32AB, includes a # 194 size bulb already installed. In the future, if you need to replace the bulb, the lens is removable. For a replacement bulb we have the Replacement Side Marker Light Bulb # 194, part # A194B. For a replacement lens, we have the Replacement Amber Lens, part # A32AB.
view full answer... - Replacement Light Recommendation for SAE AP2-80Based on the picture you sent in it looks like you would need a part # MC48AB and # MC48RB as a replacement. This measures 3-29/32" L x 1-27/32" W x 1-1/32" D so you would need to compare that to the light you have. The mounting holes are 3-3/8 inches apart on center.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
1/11/2024
Oh that is not good to hear! Lets get you over to customer service for them to get this corrected for you.