Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly - 54" Long - 800 lbs

Kwikee RV Cargo Slides - LC370785

Build an RV sliding cargo tray with this rail kit, a tray trim kit (sold separately), and plywood bottom (not included) to easily retrieve gear from your compartment. Included rails slide tray out so you don't have to crawl into your compartment.

Features:

• Rails pair with a tray trim kit (sold separately) to form a slide-out tray for your RV or camper's cargo compartment
  • Requires carpet-covered plywood (not included) for the bottom
  • Stores camping and hiking gear, tools, power cords, and more
• Sliding design eliminates the need for you to crawl into a dirty or cramped compartment
• Spring-loaded latches lock the rails in the stowed position to prevent it from sliding out while traveling
• Durable steel construction with rust-resistant black powder coat finish
• Easy, bolt-on installation into your cargo compartment
  • Inner and outer rail assemblies are included
  • Wood screws and 5/16" hardware are not included
• Made in the USA

Specs:

• Fits: RV cargo compartments at least 54" long
• Tray weight capacity (when fully assembled and installed): 800 lbs
• Overall exterior dimensions (per assembled rail): 3-1/2" wide x 6-1/8" tall
  • Length when fully stowed: 52-7/8"
  • Length when fully extended: 87-7/8"
• Mounting hole spacing (per assembled rail):
  • Between 2 holes: 17-11/16"
  • Between the holes on the ends: 50-13/16"
• 1-Year warranty

Pair this rail kit with a tray trim kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. The complete tray lets you store and organize camping and hiking gear, tools, and power cords, so your compartment doesn't become too cluttered. It also glides out when you need it so that you don't have to crawl into the dirty or cramped compartment in order to retrieve your belongings.

Determining Which Rail Kit You Need

To figure out which rail kit you need, simply measure the overall inside length of your cargo compartment. Whatever that measurement is will be the maximum length the rail kit can be. For example, for this 54" rail kit, your cargo compartment should measure at least 54" long. Depending on your RV or camper setup, you might need to go with a rail kit that is slightly smaller than your cargo compartment to account for any potential clearance issues.

If your cargo compartment is shorter or longer, please reference the table below to determine which trim kit you would need.

Find the trim kit you need to complete your setup:

The trim kit needed to complete your SuperSlide II is sold separately. To determine which trim kit you need, measure the width of your cargo compartment opening, and then subtract 4. For example, if your cargo compartment measures 55" wide, then you would need a 51" trim kit. This ensures that the tray would have the proper clearance as it slides in and out.

Installing the Rail Kit

This rail kit includes inner rail and outer rail assemblies. First you will need to assemble the rails together by sliding the inner rails all the way onto the outer rails. Then install all of the pieces of the tray trim kit (sold separately) to the rails. Lastly, install the carpeted wood bottom to the rails with wood screws (not included), and there are 2 ways that you can do this. You can measure the areas in between the mid-rail pieces and then cut out plywood inserts to fit. Those uncovered pieces then act as dividers to prevent smaller items from shifting around too much. Or, as another option, you could cover the entire bottom with 1 long piece of plywood for a full-length tray floor.

Once the tray has been completely assembled, place it onto the floor of the cargo compartment, and make sure there's adequate clearance for the compartment door. Depending on your setup, you may need to raise the outer rails with 2x4s (not included). Once the tray is fully aligned, use the integrated mounting tabs on the rails and hardware (not included) to bolt it down.

370785 Lippert Components (LCI) Rail Kit for Quickee Super Slide 2 RV Sliding Storage Tray Assembly - 54" Deep

Alternate part number: 905892000

Installation Details